On a hot summer that the water in a small country pool is heated naturally. When the weather is heat time is extended or, generally speaking, the temperature doesn’t reach a comfortable temperature of +22oC. In large pools organic remonttool.ru heating takes much longer. To solve this problem, made a heater to your pool, working out of various energy sources.
Heat exchanger
The simplest water heater for the pool is an heat exchanger. The basis of this design is a tank, through which the warm liquid flows. It is linked to the heating system or some other heating water heater. In the tank is a built-in coil. This component is that the heat exchanger. Pool water circulates through the coil, warmth against the liquid inside the tank.
Why do you want such a complex pool heater if you’re able to just run the water right throughout the heater? You can use such a scheme, however there are just two problems:
- The pool water contains little particles of chlorine and other impurities. When heated, they settle to the walls of the heat exchanger because of solid sludge, clogging it.
- Pool water is saturated with oxygen, which divides the metal walls of the heat exchanger.
To costly boiler or flow heater doesn’t neglect, the heating system is equipped with a second loop. The heat exchanger is easier and cheaper to change if it gets clogged or leaks from oxidation of the walls.
In a small children’s pool piping is laid on the principle of the machine”underfloor heating”. A small amount of water the coil will heat fast, and with a massive volume will not cope. Electric versions
The 2nd most popular is an electrical heater for your pool, composed of a machine, heating elements and a thermostat. Devices come in two types:
- Accumulation. The system is made up of massive tank, in which the water is warmed from the heating elements, and from that point it is fed to the pool.
- Flow-through. The unit is linked to the water treatment system of the pool. There’s a filter in front of the water heater, which moves purified water, which eliminates the creation of solid deposits.
- Based on the ability, the apparatus are connected to single-phase and systems that are interpersonal.
The need to warm a large amount of water requires the usage of powerful devices. Electricity prices are huge, and you want to lay another field of wiring. Heat pump
Rather complicated in the machine of the heater to the pool pump describes innovative technology. The unit is efficient and cost-effective, but it is rarely used due to its high cost.
Significant: The heat pump works on the principle of their refrigerator, only here the circuit that releases heat, not cold, is in demand.
The machine is made up of 2 circuits, in which the fluid circulates. The outer pipe can be laid underground, at the bottom of the reservoir or other area where you can extract the heat. The interior circuit is placed within the pool. It gives the water that the heat extracted from the outer tube.
