The thickness of the substance is 4 mm.
If you want, you can increase the period of the structure to 6 metres or more. To try it, it’s sufficient to join a two-meter extension. When picking a drawing, look closely at the space between the arches. This figure should be 65 cm, and which is the most appropriate length for the specified depth of this material. The width of the doors in line with the maker’s drawing is 90 cm.
Before assembling a polycarbonate greenhouse, then it’s important to select a spot because of the location. If this is done correctly, it is possible to provide yourself with a harvest of fresh vegetables for the entire year.
The location for the future greenhouse is marked immediately in the preparation of the garden plot. So as to melt the snow in the place of the greenhouse as soon as possible, the ideal point on the site will be a small elevation. Furthermore, in such a location won’t need to be concerned about higher humidity as dirt and air within the construction.
Build a polycarbonate greenhouse in an elevated site – intends to care for the best temperature inside.
When it isn’t feasible to place a greenhouse on an elevated position, you will have to pour a layer of fine crushed stone about 20 cm and the same layer of fertile land to make seedbeds.
Before building a greenhouse on your backyard plot, you should also consider where and how this structure is going to be installed. First, you have to select a location for this. The greenhouse ought to be located at a metropolitan region at least a few meters away from houses, barns and other structures.
The best way to install a greenhouse in Line with the sides of the Planet
Make sure you level the soil surface – it’s best to even remove the top layer. This will also get rid of weed seeds. And for ease of work, eliminate the dirt in a place that’s around a meter wider on each side of the rectangle that you desire.
In addition, it is worth considering using a base. As producers state, now most greenhouses don’t need it, especially if they (greenhouses) are used just in the spring and summer time. But, seasoned anglers still suggest earning an elementary foundation from a pub. It is quite simple – it is enough to connect with each other using metal screws and corners four parts of timber using a cross-section of 10 * 10 cm. The size of such a foundation should be equivalent to the base of their upcoming greenhouse.
Simple bar base
You can also make a strip foundation of concrete. He is more dependable than a pub base, but requires more financial and labour expenses. Incidentally, the greenhouse, which is utilised in the winter, without it and don’t do with it at all.
Stages of the creation of a strip foundation: a schematic representation
Many manufacturers counsel to install greenhouse structures without even building a base. Even for this purpose, they equip the frame with special T-shaped legs, gidpostroy.ru so the construction was securely fixed. But, as practice shows, it is still vital to construct a foundation: so and the basis will be more firmly fixed and also the elements of the basis in contact with the soil, will be stored much more in its initial state.
The principal issue is to treat the material with special agents to protect the wood from moisture. The substance is normally installed on concrete cubes that are dug into the soil. To get a six-meter structure, they need 10 bits: four on each side and one at the middle of the ends.
Before you perform the greenhouse itself, you need to choose the right spot for this. It has to be an even site, so that the frame was located evenly, without distortions. It should be bright and not obscured by buildings or trees.
